|
ACCESSORIES
|
|
Model W H WP CH
Weld Pins |
|
 |
-
Unique 4-sided point
assures needle-like penetration into the thickest insulation
-
The insulation is
protected by our exclusive oversized cupped head to prevent tearing
-
Compatible with most
weld machines to apply weld pins up to 2 inches in length
|
|
|
|
|
Model VNN-VNA
Turning Vane |
|
 |
-
Roll formed 24 gauge
galvanized steel (4”)
-
Roll formed 26 gauge
galvanized steel (2”)
-
Available in 10’ lengths
-
Available in specialty
metals
-
Double wall turning vane
design in accordance to SMACNA guidelines
-
Acoustical vane utilizes a
perforated inner vane wall and insulation for sound absorption
-
Use with Turning Rail for
proper installation
|
|
Submittal Drawing |
|
|
|
|
|
Model RAL
Turning Rail |
|
|
-
Roll formed 22 gauge
galvanized steel (4”)
-
Roll formed 24 gauge
galvanized steel (2”)
-
Available in 10’ lengths
-
Available in specialty
metals
-
Turning rail design in
accordance to SMACNA guidelines
-
Provides extra wide margin
for easy fastening
-
Rail stacks to minimize
storage and shipping requirements
-
Self-aligning tabs for easy
vane installation
-
Use with Turning Vane for
proper installation
|
|
Submittal Drawing |
|
|
|
|
|
Model FC
Flexible Duct Connector |
|
 |
-
Roll formed galvanized steel
and fabric
-
Available in both
commercial and residential grades
-
Available with two
different styles of seam wraps
-
Available in 100’ rolls
-
Available in specialty
metals
-
All fabrics rated to 10”
S.P.
-
Absorbs sound and vibration
to prevent from transmitting throughout system
-
Reference fabric chart for
a summary of the available fabrics
|
|
Submittal Drawing |
|
|
Fabric Selection Chart
|
|
|
|
|
Model TZH
Trapeze Hanger |
|
 |
-
Roll formed galvanized steel
-
Slotted holes 2.25” on
center
-
Available in both 16 and 18
gauge
-
Available in 10’ lengths
-
Inexpensive, yet strong
alternative to standard strut systems
-
Compatible with multiple
clamp and component items
-
Use trapeze washer and
threaded rod for a complete system
|
|
Submittal Drawing |
|
|
|
|
|
|
Model AG
Angle Iron - Solid, Punched and Slotted |
|
 |
-
Roll formed galvanized steel
-
Slotted and punched holes
4” on center
-
Available in 14, 16 and 18
gauge
-
Available in 12’ lengths
-
Available in specialty
metals
-
Great multipurpose product
|
|
Submittal Drawing |
|
|
|
|
|
|
Model SH
Hanger Strap |
|
 |
-
Galvanized steel
-
Available in gauges ranging
from 16 to 24
-
Available in 200’ rolls or
10’ flat blanks
-
Great multipurpose product
for hanging ductwork
-
Use with strap buckle for
quick and easy installation
|
|
Submittal Drawing |
|
|
|
|
|
|
Model THR
Threaded Rod |
|
 |
-
Zinc plated threaded rod
-
Available in standard
thread diameters ranging from 1/4” to 7/8”
-
Available in 6’, 10’ or 12’
lengths
-
Use with trapeze hanger and
washer for a complete hanging system
|
|
Submittal Drawing |
|
|
|
|
|
|
Model RL
Rod Lock |
|
 |
-
Zinc plated grade 5 bolt
-
Zinc plated washer with
neoprene gasket
-
Zinc plated nut with spring
steel seat plates
-
Available in both ½” and ¾”
sizes
-
Use with standard conduit
to provide quick and easy installation of tie
-
Use for both joint and
center tie rods
-
Pull tested to over 1900
lbs.
-
Use rod lock tool for easy
installation
-
Consult SMACNA Duct
Construction Standards for application specifications
|
|
Submittal Drawing
pg. 1 |
|
|
Submittal Drawing
pg. 2 |
|
|
|
|
|
|
Model BN
Bull Nosing |
|
 |
-
Formed 26 gauge galvanized
steel
-
Self-adhesive tape provides
quick and easy installation
-
Available in sizes for
insulation from 1/2” to 2” thick
-
Consult SMACNA Duct
Construction Standards for application specifications
|
|
Submittal Drawing |
|
|
|
|
