|
SEALANTS, GASKETS AND
ADHESIVES
|
|
Model ART
Roller Type Adhesive |
|
|
-
Designed for bonding duct
liner, duct wrap and fibrous glass insulations to painted steel,
galvanized or aluminum duct
-
Can also be used a contact
bond adhesive in areas where water entrapment may be a problem
-
This water-based product is
UL listed and meets NFPA 90A and 90B 25/50 requirements
-
Available in 5 gallon
buckets
|
|
Submittal Drawing - pg. 1 |
|
|
Submittal Drawing - pg. 2 |
|
|
|
|
|
Model AST
Spray Type Adhesive |
|
|
-
Designed for bonding
fiberglass and mineral wool duct liner to galvanized duct
-
Ideal for applying with
high volume spray and coil line operations
-
Can also be applied by
extrusion or manual spray equipment
-
This water-based product is
UL listed and meets NFPA 90A and 90B 25/50 requirements
-
Available in 55 gallon
drums
|
|
Submittal Drawing - pg. 1 |
|
|
Submittal Drawing - pg. 2 |
|
|
|
|
|
Model SSB
Solvent-Based Adhesive |
|
|
-
Designed as a high velocity
duct joint sealant for indoor applications
-
Can also be used to adhere
duct fabrics and flexible duct to high velocity ducts
-
This solvent-based product
is UL listed and meets NFPA 90A and 90B 25/50 requirements
-
Available in 1 gallon
buckets or 11 ounce tubes
|
|
Submittal Drawing - pg. 1 |
|
|
Submittal Drawing - pg. 2 |
|
|
|
|
|
|
Model SWB-N
Water-Based Sealant |
|
|
-
Designed as a vapor barrier
duct sealant for indoor or outdoor applications
-
Can be applied to
galvanized, aluminum or mild steel ducts
-
It is ideal for sealing ASJ,
FRK and FSK jackets and board facings at joints or laps
-
Also use over staple and
weld pin punctures
-
The cartridge grade is an
ideal joint sealant with polystyrene insulation
-
This water-based product is
UL listed and meets NFPA 90A and 90B 25/50 requirements
-
Available in 5 or 1 gallon
buckets or 11 ounce tubes
|
|
Submittal Drawing - pg. 1 |
|
|
Submittal Drawing - pg. 2 |
|
|
|
|
|
|
Model SWB-R
Water-Based Reinforced Sealant |
|
|
-
Designed as a vapor barrier
duct sealant for indoor or outdoor applications
-
Can be applied to
galvanized, aluminum or mild steel ducts
-
Also use over staple and
weld pin punctures
-
Fiber reinforcement ensures
that it is tough yet flexible
-
This water-based product is
UL listed and meets NFPA 90A and 90B 25/50 requirements
-
Available in 5 or 1 gallon
buckets or 11 ounce tubes
|
|
Submittal Drawing - pg. 1 |
|
|
Submittal Drawing - pg. 2 |
|
|
|
|
| |
|
|
Model SPB
Pumpable Butyl Sealant |
|
|
-
Provides a non-drying,
permanently flexible seal for rigid or expansion joints on a variety of
materials
-
It provides a moisture and
vapor tight seal
-
Available in 55 gallon
drums or 5 gallon buckets
|
|
Submittal Drawing |
|
|
|
|
|
|
Model GSK-BT
Butyl Tape Gasket |
|
 |
-
Provides a non-drying,
permanently flexible gasket
-
It will adhere to a variety
of clean, dry surfaces
-
Contains high percentage of
virgin butyl rubber to enhance its sealing and aging characteristics
-
It is formulated to retain
handling properties through a wide temperature range
-
It will not crack or
separate while being applied at low temperature ranges
-
Product is 1/8” thick and
5/8” wide, and is available in 30’ rolls
-
Product is UL listed
|
|
Submittal Drawing |
|
|
|
|
|
|
Model GSK-BP
Butyl Patch Gasket |
|
|
-
Provides a non-drying,
permanently flexible gasket
-
It will adhere to a variety
of clean, dry surfaces
-
Contains high percentage of
virgin butyl rubber to enhance its sealing and aging characteristics
-
It is formulated to retain
handling properties through a wide temperature range
-
It will not crack or
separate while being applied at low temperature ranges
-
Product is 1/8” thick, and
is available in 1”x2” and 2”x3” patch sizes
-
Product is UL listed
|
|
Submittal Drawing |
|
|
|
|
|
|
Model GSK-NT
Neoprene Tape Gasket |
|
 |
-
Closed cell foam comprised
of neoprene, PVC and nitrile
-
It has good chemical
resistance and is flame rated
-
Product is 5/16” thick and
3/4” wide, and is available in 50’ rolls
-
Product is UL listed
|
|
Submittal Drawing |
|
|
|
|
|
|
|
